14 Installation Note E8356-90001
In This Guide
Installing Your Analyzer
-
Figure 3
Protective Earth Ground (Non-Floating)
3.
Ensure the operating environment meets the requirements found in
“Safety, Regulatory, and Environmental Information” on page 31.
Step 3. Install the Analyzer
The analyzer can be installed on a bench top or in an equipment rack. When
installing an analyzer equipped with handles in an equipment rack, use Option
1CP. When installing an analyzer not equipped with handles in an equipment
rack, use Option 1CM.
Some analyzer performance parameters are specified for 25°C. Refer to
the Help system in the analyzer for the complete specifications.
Please review all safety information located in
Environmental Information” on page 31
, before proceeding with
installing and using the analyzer
