Keysight Technologies N5224AU-401, Installation Note

Page: 14 / 22

Installation Note N5225-90105 13
Step 8. Install the New Cables
CAUTION
Follow instructions carefully when making cable connections, especially wire harness
connections. Incorrect connections can destroy components, resulting in additional customer
costs.
Install the Semirigid Cables
To see an image showing the location of these cables, click the Chapter 6 bookmarks “Bottom RF Cables, 4-
Port Configuration, Option 401” in the PDF Service Guide
1
. New parts are listed in Table 1 on page 7 .
Install the following new cables in the order listed.
• W40 (N5245-20042) Port 2 RCVR B IN to A27 mixer brick (B)
* As shown in
Figure 2 on page 14 , install one cable clamp (part number 1400-1334) to secure W40 (part
number N5245-20042).
1. See “Downloading the Online PNA Service Guide” on page 5 .