Keysight Technologies M9336A, Startup Manual

Page: 42 / 51

Step 5 - Generate and View an Output Signal
Step 5 - Generate and View an Output Signal
After verifying the operation of the AWG in Step 4 , you are ready to generate an
output signal and view it on an oscilloscope.
1. The first step in this process is to open the SFP of the AWG.
a. Open the MAwg SFP by selecting Start > All Programs > Keysight > MAwg >
MAwg SFP.
The Connect to Instrument dialog is displayed.
b. Select P9336A/M9336Ain the displayed list of instruments (depending upon
the instrument) and click Connect.
2. Connect a high-quality SMB (Female) to the BNC cable between the
AWG Channel Source Output and the Input connector on the oscilloscope.
3. On the MAwg SFP, select the desired waveform uusing Create Waveform
Segment From File...in the Waveform Segments tab.
For information on how to create a waveform, refer to Create a
Waveform Segment in the Modular AWG SFP Help.
4. Now, select the Operation tab, and select the Output Enabled check box to
enable the channel output.
AWG Startup Guide 42