Keysight Technologies M9336A, Startup Manual

Page: 29 / 51

Step 3B - Install the M9336A PXIe Module
For up-to-date details on hardware and software requirements, refer to
the Supported Hardware and Software section in the
Introduction
document.
Do not power up the controller until instructed to do so later in this
document.
Embedded Controller
If your configuration contains a Keysight Embedded Controller (for example,
M9037A), follow the procedure below:
(For additional details, refer to the instructions in the M9037A Startup Guide )
1. Remove the M9037A module from its ESD protective bag. Refer to ESD
precautions .
2. Install the embedded controller in Slot 1 (see
icon above the slot) in the
chassis.
29 AWG Startup Guide