Keysight Technologies M9336A, Startup Manual

Page: 33 / 51

Step 3B - Install the M9336A PXIe Module
Install the Software
System Requirements
For up-to-date details on M9336A hardware, software and other requirements, refer
to the Supported Hardware and Software section in the Introduction document.
Software Installation Overview
This installation includes the following:
– Keysight IO Libraries Suite (IOLS), which includes the Keysight Connection Expert.
This software is available at www.keysight.com/find/iosuite . This software must
be installed first.
Version 2018 Update 0.1 (or later) of the Keysight IO Libraries Suite is
required.
The Keysight Instrument Control DVD, which includes the IO Libraries
Suite software, is no longer shipped with Keysight instruments. If you
require a Keysight Instrument Control DVD, it can be ordered by
contacting your Keysight Customer Contact Center.
– AWG software, which includes the soft front panel (SFP), device driver (IVI.NET,
IVI-C and LabVIEW) and documentation for the AWG. This software is included
with your shipment.
Software Installation Procedure
The following are steps to install the Keysight IO Libraries Suite and AWG software:
1. Launch the IO Libraries Suite installer file to run the setup.
Follow the guided tour to complete the installation.
2. Launch the AWG installer file to run the setup.
3. Choose the features to install.
Follow the guided tour to complete the installation.
4. After the installation completes, do one of the following for using a M9336A AWG
with a Embedded/Remote Contoller:
For Embedded Controller For Remote Controller
1. Select Yes, I want to restart my computer
now. This is the default selection.
2. Click Finish.
3. Wait for the system to restart.
1. Select No, I will restart my computer
later.
2. Click Finish.
3. Shut down the remote controller PC.
33 AWG Startup Guide