Keysight Technologies M9300A, Startup Manual

Page: 15 / 45

15
Getting Started
STEP 3. Install the Network Analyzer Modules
b. Table 1-1 , Table 1-2 , Table 1-3 , Table 1-4 , Table 1-5 and Table 1-6
show the complete possible configuration for combination of Standard
Receiver or Direct Access Receiver and Configurable Test Set. In the
tables, 76A (M9376A) can be replaced with the M9377A if it is used as
direct access receiver usage.
NOTE
3 way divider is available separately from M9485A as Y9485A-003. Many other
combination may be possible if you use 3 way divider. If cables can be connected correctly
without any stress and software can detect all modules properly, the configuration will
work. Contact with Keysight if you need an assistance.
Table 1-1 Possible Configuration for Combination of Configurable Test Set (1 Set) and
Standard Receiver or Direct Access Receiver
Table 1-2 Possible Configuration for Combination of Configurable Test Set (2 Sets) and
# of Slot #
77A
&
78A
pair
76A 7 8 9 10 11 12 13 14 15 16 17 18
1 1 78 77A 76A
1 3 78 77A 76A 76A 76A
1 5 78 77A 76A 76A 76A 76A 76A
1 7 78 77A 76A 76A 76A 76A 76A 76A 76A
1 9 77A 78A 76A 76A 76A 76A 76A 76A 76A 76A 76A
1 1 76A 77A 78
1 5 76A 76A 76A 77A 78 76A 76A
1 7 76A 76A 76A 77A 78 76A 76A 76A 76A
1 9 76A 76A 76A 77A 78 76A 76A 76A 76A 76A 76A
1 5 76A 76A 76A 76A 77A 78 76A
1 7 76A 76A 76A 76A 77A 78 76A 76A 76A
1 9 76A 76A 76A 76A 77A 78 76A 76A 76A 76A 76A
1 5 76A 76A 76A 76A 76A 76A 76A 77A 78
1 7 76A 76A 76A 76A 76A 76A 76A 77A 78 76A 76A
1 9 76A 76A 76A 76A 76A 76A 76A 76A 76A 77A 78