Keysight Technologies i7090, Installation Instructions Manual

Page: 3 / 14

i7090 System Installation 3
System Installation
Safety Notices 4
Before Installation 5
Install Monitor, Mouse and Keyboard 5
Release Press Safety Brackets 6
Install Tower Light 7
Connect Air Supply and SMEMA Cables 9
Connect to Network 10
Open Shutters for Board Access 11
Adjust Conveyor Height and Alignment 12
Power Up the System 13
This guide describes the installation of the Keysight i7090 board test system.
These tools are needed in addition to the tools supplied with the system shipment:
• Allen wrench set (metric)
• 12” adjustable wrench
• Ladder