28
Keysight UXR-Series and MXR/EXR-Series MultiScope Hardware Configuration Guide
5
Next Steps
UXR-Series MultiScope Calibration Connections
Part of what the MultiScope control software provides is the ability to
automatically deskew multiple oscilloscope frames and channels using a
calibration procedure.
The hardware for performing MultiScope calibration is included in the N2164A
UXR-Series Multi-Frame Base Kit. These parts are used to create a long
calibration cable:
The long calibration cable is connected from the Follower #1 oscilloscope’s
Cal Out
output to MultiScope system input channels, as prompted by the MultiScope
control software’s calibration procedure.
Part number
Qty
Description
54964-61632
2
1 m phase-stable cable
1250-2818
2
Right-angle male to female SMA adapter
1250-3758
1
Female/female SMA adapter 3.5 mm (f)
1250-3347
1
Push-on male SMA to female SMA adapter
Summary of Contents for EXR Series
Page 1: ...Keysight UXR Series and MXR EXR Series MultiScope Hardware Configuration Guide...
Page 32: ...32 Keysight UXR Series and MXR EXR Series MultiScope Hardware Configuration Guide 5 Next Steps...
Page 34: ...34 Keysight UXR Series and MXR EXR Series MultiScope Hardware Configuration Guide Index...
