Keysight Technologies E5400-Pro Series, User Manual

Page: 16 / 80

16 Keysight Technologies E5400-Pro Series Soft Touch Connectorless Probes User’s Guide
1 Overview, Installation, and Selection of Probing Options
The E5405B-Pro Series 17-channel Differential Soft Touch Probe
(for analyzers with 90-pin cable connectors)
The Keysight E5405B-pro series probe is a 17-channel, single-ended, soft
touch probe compatible with the Keysight logic analysis modules listed in
Table 1 on page 12. It is capable of capturing data up to the rated
maximum state (synchronous) analysis clock rates of all the supported
analyzers, with differential signal amplitudes as small as 200 mV
peak-to-peak. A retention module must be installed on the target system
board to attach the probe to the board.
A kit of five retention modules are supplied with each probe. Refer to
“Ordering retention modules" on page 13 for information on ordering
more.
See “Mechanical Considerations" on page 19 for information on designing
your target system board.
Figure 4 E5405B-pro series differential soft touch probe and
E5403A retention module