Keysight Technologies E5400-Pro Series, User Manual

Page: 67 / 80

Keysight Technologies E5400-Pro Series Soft Touch Connectorless Probes User’s Guide 67
Circuit Board Design 5
Data and Clock Inputs per Operating Mode
The following table shows the number of data and clock inputs for each
connector on your target system for the various operating modes of your
logic analyzer.
Table 6 16760A logic analyzer
Note 1: In the 200 Mb/s, 400 Mb/s, and 800 Mb/s synchronous (state) analysis modes,
and the 800 Mb/s eye scan mode, there is one clock input which must be routed to
the clock input on pod 1 (of the master module, in a multi-card set). The clock in-
puts on other pods can be assigned to labels and acquired as data inputs.
Note 2: In the 1250 Mb/s and 1500 Mb/s synchronous (state) analysis modes, and in
the 1500 Mb/s eye scan mode, the clock inputs on other pods cannot be assigned
to labels and acquired as data inputs.
Note 3: In asynchronous (timing) analysis, all inputs including clocks can be acquired
and assigned to labels.
Operating
Mode
E5405B
17-channel
differential
soft touch
E5405B with half-channel
adapter E5386A
E5402A or E5406A
34-channel
single-ended
soft touch
E5402A or
E5406A with half-channel
adapter E5386A
Synchronous (state)
analysis
200 Mb/s,
400 Mb/s,
800 Mb/s 16 data
plus 1 clock input (see
note 1) N/A 32 data
plus 2 clock inputs
(see note 1) N/A
Synchronous (state)
analysis
1250 Mb/s
1500 Mb/s 8 data
plus 1 clock input (see
note 2) 16 data
plus 1 clock input
(see note 2) 16 data
plus 1 clock input
(see note 2) 16 data
plus 1 clock input
(see note 2)
Eye scan mode
800 Mb/s 16 data
plus 1 clock input (see
note 1) N/A 32 data
plus 2 clock inputs
(see note 1) N/A
Eye scan mode
1500 Mb/s 8 data
plus 1 clock input (see
note 2) 16 data
plus 1 clock input
(see note 2) 16 data
plus 1 clock input
(see note 2) 16 data
plus 1 clock input
(see note 2)
Timing mode 16 data
plus 1 clock input (see
note 3) N/A 32 data
plus 2 clock inputs
(see note 3) N/A