60
Keysight CX3300 User’s Guide, Edition 5
Using the CX3300
Setting Up Triggers
Setting the CX3300 for an Edge Trigger
1. Press the
Source
key until the desired source LED is lit.
You can choose any of the channels or the Aux Trig or Line input as the source
for an edge trigger.
2. Press the
Slope
key until the desired slope LED is lit.
You can have an edge trigger on a rising or falling edge, or both.
3. Press the
Sweep
key until the desired LED is lit (Trig’d or Auto).
When Trig’d is selected, the CX3300 must find the trigger before capturing and
displaying data.
When Auto is selected, if a trigger does not occur within a certain amount of
time, an acquisition is automatically saved and displayed. In Auto trigger
mode, you are able to see your signals while setting up the desired trigger.
4. Turn the Level knob to adjust the current or voltage level at which the CX3300
will trigger.
You can also drag the trigger level indicator at the left side of the display to
adjust the level. See
for the trigger level indicator.
Pressing the knob changes the trigger level to half.
Summary of Contents for CX3300 Series
Page 8: ......
Page 86: ...86 Keysight CX3300 User s Guide Edition 5 Using the CX3300 Using Online Help...
Page 113: ......
