Notices
© Keysight Technologies, Inc. 2010-2015
No part of this manual may be reproduced
in any form or by any means (including
electronic storage and retrieval or transla-
tion into a foreign language) without prior
agreement and written consent from
Keysight Technologies, Inc. as governed by
United States and international copyright
laws.
Manual Part Number
M9391-90015
Edition
May 2015
Printed in USA
Keysight Technologies, Inc.
Sales and Technical Support
For product specific information and sup-
port, and to obtain the latest software and
documentation, refer to
.
Worldwide contact information for repair
and service can be found at:
Regulatory Compliance
This product has been designed and
tested in accordance with accepted indus-
try standards, and has been supplied in a
safe condition. To review the Declaration
of Conformity, go to:
.
Warranty
The material contained in this document
is provided “as is,” and is subject to being
changed, without notice, in future editions.
Further, to the maximum extent permitted
by applicable law, Keysight disclaims all
warranties, either express or implied, with
regard to this manual and any information
contained herein, including but not limited
to the implied warranties of merchant-
ability and fitness for a particular purpose.
Keysight shall not be liable for errors or
for incidental or consequential damages
in connection with the furnishing, use, or
performance of this document or of any
information contained herein. Should Key-
sight and the user have a separate written
agreement with warranty terms covering
the material in this document that conflict
with these terms, the warranty terms in
the separate agreement shall control.
Keysight Technologies does not warrant
third-party system-level (combination of
chassis, controllers, modules, etc.) perfor-
mance, safety, or regulatory compliance,
unless specifically stated.
Technology Licenses
The hardware and/or software described
in this document are furnished under a
license and may be used or copied only in
accordance with the terms of such license.
US Government Rights
The Software is “commercial computer
software,” as deined by Federal Acquisi-
tion Regulation (“FAR”) 2.101. Pursuant to
FAR 12.212 and 27.405-3 and Department
of Defense FAR Supplement (“DFARS”)
227.7202, the U.S. government acquires
commercial computer software under
the same terms by which the software is
customarily provided to the public. Ac-
cordingly, Keysight provides the Software
to U.S. government customers under its
standard commercial license, which is
embodied in this EULA. The license set
forth in this EULA represents the exclusive
authority by which the U.S. government
may use, modify, distribute, or disclose the
Software. This EULA and the license set
forth herein, does not require or permit,
among other things, that Keysight: (1) Fur-
nish technical information related to com-
mercial computer software or commercial
computer software documentation that is
not customarily provided to the public; or
(2) Relinquish to, or otherwise provide, the
government rights in excess of these rights
customarily provided to the public to
use, modify, reproduce, release, perform,
display, or disclose commercial com-
puter software or commercial computer
software documentation. If you are a U.S.
government customer, you acknowledge
that you have reviewed the Software and
the terms of this EULA and agree that the
license provided for herein is consistent
with Federal law and otherwise satisies
the U.S. government needs. In addition, if
you are a U.S. government customer you
agree that this EULA relects the entirety
of the terms of Keysight’s customary com-
mercial license applicable to U.S. govern-
ment customers. No additional govern-
ment requirements beyond those set
forth in this EULA shall apply, except
to the extent that those terms, rights,
or licenses are explicitly required from
all providers of commercial computer
software pursuant to the FAR and the
DFARS and are set forth speciically
in writing elsewhere in this EULA.
Keysight shall be under no obligation
to update, revise or otherwise modify
the Software.
Safety Notices
The following safety precautions
should be observed before using this
product and any associated instrumen-
tation. This product is intended for use
by qualified personnel who recognize
shock hazards and are familiar with the
safety precautions required to avoid
possible injury. Read and follow all in-
stallation, operation, and maintenance
information carefully before using the
product.
If this product is not used as specified,
the protection provided by the equip-
ment could be impaired. This product
must be used in a normal condition
(in which all means for protection are
intact) only.
The types of product users are:
– Responsible body is the individual
or group responsible for the use
and maintenance of equipment, for
ensuring that the equipment is oper-
ated within its specifications and
operating limits, and for ensuring
operators are adequately trained.
– Operators use the product for its
intended function. They must be
trained in electrical safety pro-
cedures and proper use of the
instrument. They must be protected
from electric shock and contact with
hazardous live circuits.
– Maintenance personnel perform
routine procedures on the product
to keep it operating properly (for
example, setting the line voltage or
replacing consumable materials).
Maintenance procedures are de-
scribed in the user documentation.
The procedures explicitly state if the
operator may perform them. Other-
wise, they should be performed only
by service personnel.
WARNING
