Keysight Technologies 90015, Manual

Page: 12 / 24

12 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide
Technical Specifications and Characteristics
Dynamic range
Displayed average noise level (DANL) 19
Conversion type Frequency Specification Nominal
Pre−amp OFF
Image protect
< 100 MHz −145 dBm/Hz
100 to < 700 MHz −137 dBm/Hz −147 dBm/Hz
700 MHz to < 5.75 GHz −140 dBm/Hz −148 dBm/Hz
5.75 to 6 GHz −129 dBm/Hz −146 dBm/Hz
Single <1.2 GHz −148 dBm/Hz −154 dBm/Hz
1.2 to 3.1 GHz −143 dBm/Hz −152 dBm/Hz
> 3.1 to < 5.4 GHz −138 dBm/Hz −149 dBm/Hz
5.4 to 6 GHz −133 dBm/Hz −148 dBm/Hz
Pre−amp ON
Image protect < 100 MHz −162 dBm/Hz
100 MHz to < 2.7 GHz −156 dBm/Hz −161 dBm/Hz
2.7 to 4.4 GHz −155 dBm/Hz −160 dBm/Hz
> 4.4 to < 5.6 GHz −152 dBm/Hz −157 dBm/Hz
5.6 to 6 GHz −141 dBm/Hz −154 dBm/Hz
Single <1.1 GHz −157 dBm/Hz −161 dBm/Hz
1.1 to < 3.6 GHz −154 dBm/Hz −158 dBm/Hz
3.6 to 5 GHz −151 dBm/Hz −156 dBm/Hz
> 5 to 6 GHz −146 dBm/Hz −153 dBm/Hz
Third order intermodulation distortion (TOI)
20
TOI
23
Distortion
24
Conversion type: auto Frequency Specification Typical Specification
Pre−amp OFF
21
≤ 400 MHz +15 dBm +20.5 dBm −52 dBc
> 400 MHz to 3 GHz +18 dBm +23 dBm −52 dBc
> 3 GHz +20 dBm +23.5 dBm −52 dBc
Pre−amp ON
22
≤ 100 MHz −9.9 dBm −2.5 dBm −56 dBc
> 100 to 850 MHz −7.9 dBm +2 dBm −58 dBc
> 850 MHz to 2 GHz −4.3 dBm +5 dBm −47 dBc
> 2 to 3 GHz −0.9 dBm +7 dBm −41 dBc
> 3 to 6 GHz +1 dBm +5 dBm −32 dBc
19. Expected input level of −50 dBm. Mixer level 10 dB.
20. Two tone, 100 kHz tone spacing.
21. Expected input level −5 dBm. Mixer level 10 dB.
22. Expected input level −25 dBm. Mixer level 15 dB.
23. TOI = third order intercept. The TOI is given by the input tone level (in dBm) minus (distortion/2) where distortion is the relative level of the distortion tones in dBc.
24. Expected input level -10 dBm with preamp off and -30 dBm with preamp on.