Keysight Technologies 85054B, User'S And Service Manual

Page: 54 / 65

6- 2 85054B
Replaceable Parts
Introduction
Introduction
Table 6-1 lists the replacement part numbers for items included in the 85054B calibration kit
and Figure 6-1 illustrates each of these items.
Table 6-2 lists the replacement part numbers for items recommended or required for successful
operation but not included in the calibration kit.
To order a listed part, note the description, the part number, and the quantity desired. Refer to
“Contacting Keysight” on page 5-5 .
Table 6-1 Replaceable Parts for the 85054B Calibration Kit
a
Description Qty Per Kit Keysight Part Number
Calibration Devices (50

Type-N)
Type-N -m- sliding load 1 85054-60035
Type-N -f- sliding load 1 85054-60036
Type-N -m- lowband load 1 00909-60011
Type-N -f- lowband load 1 00909-60012
Type-N -m- offset short 1 85054-60025
Type-N -f- offset short 1 85054-60026
Type-N -m- offset open 1 85054-60027
Type-N -f- offset open 1 85054-60028
Adapters
Type-N -m- to Type-N -m- 1 85054-60038
Type-N -f- to Type-N -f- 1 85054-60037
Type-N -f- to 7 mm
2 85054-60031
Type-N -m- to 7 mm 2 85054-60032
Wrenches
3/4 in., 135 N-cm (12 in-lb) Torque
1 8710-1766
Spanner
1 08513-20014
Calibration Kit Storage Kit
Storage case assembly (includes items listed below)
1
85054-60039
Storage Box 1
5180-7900
Foam pad (bottom) 1 85054-80023
Foam pad (lid) 1 5181-5543
Gages
Type-N gage set (includes items listed below) 1 85054-60049
Type-N gage –f– 1 85054-60050