Keysight Technologies 16089A, Operation And Service Manual

Page: 22 / 27

22 Keysight 16089A/B/C Kelvin Clip Leads
Service
Replaceable Parts
4-
Replaceable Parts
To order parts, use the Keysight part numbers listed in Table 4-1 , Table 4-2
and Table 4-3 . If a faulty part is located in an assembly that cannot be
disassembled, order the next higher assembly or return the fixture to the
nearest Keysight Technologies Sales/Service Office for repair or replacement.
Shown are the supported parts and their respective RoHS compliant
replacement support part. RoHS conversion involves with design and
dimension change which result in the RoHS support part backward
incompatible with non-RoHS test fixture. Special handling is needed while
using the RoHS replacement part on non-RoHS test fixture. The original
support part number is replaced by the respective “RoHS Compliant
Replacement Part”. Once the original support part is depleted, please proceed
to obtain the RoHS compliant support part.
16089A Replaceable Parts
Red and orange cables are screwed on the one Kelvin clip assembly. Gray and
black cables are screwed on the other Kelvin clip assembly. Orange and gray
cables are marked “V”.
Table 4-1 16089A Replaceable Parts
Keysight
Non-RoHS Part
Number
Description Qty RoHS Compliant
Replacement
Part
Description Qty
16089-60001
Test Leads
1
1.
The whole unit. Keysight internal-only part.
1 16089-60601 Kelvin Clip
Leads
1
16089-04001 Cover Top 1 16089-60601 Kelvin Clip
Leads
1
0515-0914 Screw Flat Head
M3X0.5 L6
2 0515-1946 Screw Flat
Head M3X0.5
L6
2
16089-60011 Large Clip
Assembly
2 16089-60611 Large Clip
Assembly
2
7121-2696 Wire Marker “V” 2 7121-2696 Wire Marker
“V”
2
16089-01201 Short Bar 1 16089-01201 Short Bar 1
0515-1550 Screw 2 0515-0372 Screw 2