Keyscan Inc. A Member of the Kaba Group
8
Steps to Install and Program the NETCOM6P…cont’d
5.
On the control board, set communication for M1 to program mode for the NETCOM6P
depending on the version of PC109x control board:
J16 – pins F and G - ON
S2 DIP Switches – 7 and 8 - ON
6.
Connect the serial programming cable from the RS-232 (COM4) terminal on the
control board to the laptop or PC as illustrated in Figure 5. If using the USB-SER
adaptor, see Figure 6. Be sure the USB-SER adaptor has been configured before
programming.
7.
Apply power to the ACU control board.
8.
Turn on the laptop or PC connected to the ACU control board.
9.
Select start > All Programs and select Keyscan NETCOM Program Tool from the
Keyscan menu.
10.
From the Keyscan NETCOM Utility screen, click Program NETCOM Device.
11.
From the Select NETCOM Device Type screen, click on the Program NETCOM6 Family
of Boards button.
Continued on the next page…
