7
Absolutely do not use when there is something
wrong with blade.
■
If used when there is something wrong with blade
such as being nicked, cracked or bent, it can cause
death or injury. If there is something wrong with
blade, always replace with a new one.
If the way the blade is assembled looks not
right, do not use the equipment
■
After the blade is assembled, turn it with hand. If
there is wobble or strange noise, it can cause an
accident through vibration when it rotates. When
there is something wrong, always reassemble and
verify before using.
Before turning on, always adjust the throttle
lever to low speed (L). Only after that, turn it on.
■
If the lever is at high speed, the blade starts rotating
abruptly and can cause an accidents.
Grab the Brush Cutter securely so that it won
’
t
move and make sure that the blade is not
touching the ground, and then, turn it on.
■
If the blade touches the ground, it can break off or
shoot out and cause an accidents.
Low speed
Check tightness of each part before using.
■
If used with loosened parts or without some parts, the
product can be damaged or cause injuries.
G r o u n d
