SAFETY REGULATIONS
3
KEYANG
DD–1203L-2 DRIVER DRILL
EN
CORDLESS DRIVER DRILL
(Li-ion Battery)
It is essential that instruction manual is read
before the power tool is operated for the first time.
Always keeps this instruction manual together
with the power tool. Ensure that the instruction
manual is with the power tool when it is given to
other persons.
Table of Contents
1. General Power Tool Safety Warnings..............3
2. Specific Safety and Warnings.........................4
3. Check before Use...........................................6
4. Specifications and List of Contents.................6
5. Noise and vibration.........................................7
6. Description of Functions and Applications......7
7. Operating Instructions....................................7
8. Maintenance...................................................9
9. Examples of Application.................................9
Note
As our engineers are striving for the constant
research and development to develop the quality
of products, shape or structure of our model can
be changed without previous notice.
1.General Power Tool Safety Warnings
WARNING! Read all safety warning and all
instructions.
Failure to follow the warning
Instructions may result in electric shock, fire
and/or serious injury. Save all warnings and
instructions for future reference.
The term “power tool” in the warnings refers to
your mains -operated (corded) power tool or
Battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive
Atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs
and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There
is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will
Increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts.
Damaged or
entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors,
use an extension cord suitable for
outdoor use.
Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication.
A moment
of inattention while operating power tools may
result in serious personal injury.
b) Use safety equipment. Always wear eye
protection.
Safety equipment such as dust
mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off position before
connecting to power source and/or
battery pack, picking up or carrying the
tool.
Carrying power tools with your finger on
the switch or energising power tools that have
the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on.
A
wrench or key left attached to a rotating part
of the power tool may result in personal injury.
