background image

4

ILLUSTRATIONS

KEYANG

 DD–1203L-2 DRIVER DRILL

EN

e)  Do not overreach. Keep proper footing 

and balance at all times.

 

This enables better control of the power tool 

in unexpected situations. 

f)  Dress properly. Do not wear loose 

clothing or jewellery. Keep your hair, 

clothing and gloves away from moving 

parts.

 

Loose clothes, jewellery or long hair can be 

caught in moving parts. 

g)  If devices are provided for the connection 

of dust extraction and collection facilities, 

ensure these are connected and properly 

 

used.

 

Use of dust collection can reduce dust-

related hazards. 

4)   Power tool use and care 

a)  Do not force the power tool. Use the 

correct power tool for your application.

 

The correct power tool will do the job 

better and safer at the rate for which it was 

designed. 

b)  Do not use the power tool if the switch 

does not turn it on and off.

 

Any power tool that cannot be controlled 

with the switch  is dangerous and must be 

repaired. 

c)  Disconnect the plug from the power 

source and/or the battery pack from 

the power tool before making any 

adjustments, changing accessories, or 

storing power tools.

 

Such preventive safety measures reduce the 

risk of starting the power tool accidentally. 

d)   Store idle power tools out the reach 

of children and do not allow persons 

unfamiliar  with the power tool or these 

instructions to operate the power tool.

 

Power tools are dangerous in the hands of 

untrained users. 

e)  Maintain power tools. Check for 

misalignment or binding of moving parts, 

 

breakage of parts and any other 

condition that may affect the power tools 

operation. If damaged, have the power 

tool repaired before use.

 

Many accidents are caused by poorly 

maintained power tools. 

f)   Keep cutting tools sharp and clean. Properly 

maintained cutting tools with sharp cutting 

edges are less likely to bind and are easier to 

control. 

g)  Use the power tool, accessories and 

tool bits etc. in accordance with these 

instructions, taking into account the 

working conditions and the work to be 

performed.

 

Use of the power tool for operations different 

from those intended could result in a 

hazardous situation. 

5)  Battery tool use and care 

a)  Recharge only with the charger specified 

by the manufacturer.

 

A charger that is suitable for one type of 

battery pack  may create a risk of fire when 

used with another battery pack. 

b)  Use power tools only with specifically 

designated battery pack.

 

Use of any other battery packs may create a 

risk of injury and fire. 

c)  When battery pack is not in use, keep 

it away from other metal objects,  like 

paper clips, coins, keys, nails, screws, or 

other small metal objects that can make a 

connection from one terminal to another.

 

Shortening the battery terminals together may 

cause burns or a fire. 

d)  Under abusive conditions, liquid may be  

ejected from the battery; avoid contact. 

If contact accidentally occurs, flush with 

water. If liquid contacts eyes, additionally  

seek medical help.

 

Liquid ejected from the battery may cause 

irritation or burns. 

6) Service 

a)  Have your power tool serviced by a 

qualified repair person using only 

identical replacement parts.

 

This will ensure that the safety of the power 

tool is maintained. 

2. Specific Safety and Warnings

• 

Do not use the charger under the rain or 

when it is wet.

 

Failure to observe this can cause serious 

injury or death due to electric shock.  

• 

Do not insert metal wire or any 

conductive object through the ventilating 

opening of the charger.

 

Failure to observe this can cause serious 

injury or death due to electric shock.  

• 

Do not attempt to disassemble the 

charger and keep the charger out of the 

reach of children.

 

Summary of Contents for DD-1203L-2










Reviews: