521 East 3
rd
Street Mt. Vernon, NY 10553 • www.keydigital.com
Rev 1.0
– Nov, 2022
16
-- DEFAULT EDID 05 : HDMI 1080p@60, Audio PCM,DTS/DOLBY --
-- DEFAULT EDID 06 : HDMI 1080p@60, Audio PCM,DTS/DOLBY/HD --
-- DEFAULT EDID 07 : HDMI 4Kx2K@60/3D/HDR10/10G, 2CH PCM Audio --
-- DEFAULT EDID 08 : HDMI 4Kx2K@60/3D/HDR10/10G, PCM,DTS/DOLBY --
-- DEFAULT EDID 09 : HDMI 4Kx2K@60/3D/HDR10/10G, PCM,DTS/DOLBY/HD --
-- DEFAULT EDID 10 : HDMI 4Kx2K@60/3D/HDR10/18G, 2CH PCM Audio --
-- DEFAULT EDID 11 : HDMI 4Kx2K@60/3D/HDR10/18G, PCM,DTS/DOLBY --
-- DEFAULT EDID 12 : HDMI 4Kx2K@60/3D/HDR10/18G, PCM,DTS/DOLBY/HD --
-- DEFAULT EDID 13 : DVI Video Max. 1280x720@60, No Audio --
-- DEFAULT EDID 14 : DVI Video Max. 1920x1080@60, No Audio --
-- DEFAULT EDID 15 : HDMI 4Kx2K@30/3D/HDR10/10G, 2CH PCM Audio --
-- --
-- System Control Setup Commands: ( z=[0~4] ) --
-- SPC FB E/D : Set Front Panel Buttons E/D (E=Enable,D=Disable) --
-- SPC FCM x : Set A/V Switching Mode x=[0-2] for Front Panel Button --
-- [0: HDMI + Ext. Audio, 1 = HDMI AV, 2= Ext. Audio ] --
-- SPC RSB z : Set Main RS232 Baud Rate to z bps, z=[0-4] --
-- [0:57600, 1:38400, 2:19200, 3:9600, 4:4800] --
-- SPCDF : Reset All Settings to Factory Default --
-- SPCDF 00 : Reset All Settings except of Network/Naming Setting --
-------------------------------------------------------------------------
Status Command (STA). Returns unit status and settings in readable format:
-------------------------------------------------------------------------
-- Key Digital Systems STATUS --
-------------------------------------------------------------------------
-- Model Number: KD-MS4x4G-2, Device Name: MS4x4G-2_0001 --
-- Main F/W Ver: 1.00 --
-- --
-- Power : ON --
-- RS232 : Baud Rate=57600bps, Data=8bit, Parity=None, Stop=1bit --
-- Front Panel Button : Enabled, A/V Switching Mode= HDMI + Ext. Audio --
-- --
-- Network Setting Status --
-- MAC Address = 60:89:B1:21:10:01 --
