22
-- SPCETIPR xxx.xxx.xxx.xxx : Set Route IP Address to xxx.xxx.xxx.xxx --
-- SPCETIPP zzzz : Set TCP/IP Port to zzzz --
-- --
-- System Address Setup Command: xx = [00-99], 00 = Single --
-- SPCAxx : Set System Address to xx --
Response from Help command
– Current settings and/or status of unit:
KD-MLVX4x2Pro>sta
-------------------------------------------------------------------------
-- Key Digital Systems STATUS --
-------------------------------------------------------------------------
-- KD-MLVX4x2Pro System Address = 00 F/W Version : 1.05 --
-- --
-- RS232 : Baud Rate=57600bps, Data=8bit, Parity=None, Stop=1bit --
-- Front Panel Button : Enable --
-- Front LCD Display Backlight : ON --
-- --
-- Network Setting(Telnet Server) Status --
-- MAC Address = 60:89:b1:20:00:01 --
-- Host IP Address = 192.168.001.239 --
-- Net Mask = 255.255.255.000 --
-- Router IP Address = 192.168.001.001 --
-- TCP Port = 0023 --
-- --
-- Video Input Status --
-- 01: EDID = DEFAULT02, Link = ON , Video = HDMI , Audio = HDMI --
-- 02: EDID = DEFAULT02, Link = ON , Video = HDMI , Audio = HDMI --
-- 03: EDID = DEFAULT02, Link = ON , Video = HDMI , Audio = HDMI --
-- 04: EDID = DEFAULT02, Link = ON , Video = HDMI , Audio = HDMI --
-- --
-- Video Output Status --
-- 01: Input = 01(2K Full Screen ), Link = ON , Output = ON --
-- 02: Input = 01(2K Full Screen ), Link = ON , Output = ON --
-- --
-- Audio Output Status --
-- 01: Input = 01, HDMI = Enable , External PCM = Enable , Debug = OFF --
-- 02: Input = 01, HDMI = Enable , External PCM = Enable , Debug = OFF --
-- --
-- Multiview Mode Status --
-- Predefined Screen Mode = QUAD --
-- Transparency = 00% , Border Line = 0, Priority = 1234 --
-- --
-- Multiview Screen Manual Setup Command --
-- 01: SX = 0000, SY = 0000, EX = 0959, EY = 0539, Priority = 1 --
-- 02: SX = 0960, SY = 0000, EX = 1919, EY = 0539, Priority = 2 --
-- 03: SX = 0000, SY = 0540, EX = 0959, EY = 1079, Priority = 3 --
-- 04: SX = 0960, SY = 0540, EX = 1919, EY = 1079, Priority = 4 --
