15
The Advanced Video setup page enables creation of custom screen layouts and preset creation.
To create custom layouts in the Web Control Interface, the following tools are given:
›
A. Window location and sizing control using 1080p (2K) Multi-view Mode Configuration tool
»
An X/Y axis is used, enabling control of each pixel of the 1920x1080 screen
»
X0 / X1 range = 0 - 1919
»
Y0 / Y1 range = 0 - 1079
»
X0
= Desired location of Top-Left handle of window, from Left to Right horizontally
across the screen
»
Y0
= Desired location of Top-Left handle of window, from Top to Bottom vertically
across the screen
»
X1
= Desired location of Bottom-Right handle of window, from Left to Right horizontally
across the screen
»
Y1
= Desired location of Bottom-Right handle of window, from Top to Bottom vertically
across the screen
›
B. Image priority layering using Bring to Front (Layer Setting) tool
»
Available layer settings are 1-4
»
1 = Top layer / front
»
4 = Bottom layer / back
›
C. Save or Apply custom layouts to presets
»
Use the drop down menu to choose the desired 1080p (2K) Multi-View Custom preset
»
Press the
Apply button
if you wish to set the KD-MLV4x2Pro unit’s outputs to the selected
screen layout
»
Press the
Save button
if you wish to write the entered values of the Advanced Video section
to the selected screen layout using the dropdown menu.
»
1. NOTE: Saving to “Preset Quad”, “Preset Down”, “Preset Up”, “Preset Right”, or
“Preset Left” will affect the unit’s default presets called on the front panel. To restore the
default presets, a factory default setting must be applied.
»
2. Use the Window Location and Sizing Control and Image Priority Layering tools
(A and B in the previous image, respectively) to configure desired screen layout, then
press the
Save button
