Page 16
Page 17
Specifications
»
Video Input Interface (HDMI Input Card):
Has both HDMI and CAT6/STP (RJ45) Inputs,
only 1 of these Inputs can be selected per Input card
»
Supports HDMI 1.3a and 3D Feature of HDMI1.4
»
CAT6/STP(RJ45) works only with KD-BBTX Balun and HDMI with KD-CATHD(TX)
Baluns.
»
Video Output Interface (HDMI Output Card):
»
Features both HDMI and CAT6/STP(RJ45) outputs, and provides both simultaneously.
»
Supports HDMI 1.3a and 3D Ready, 4K Resolution Support features of HDMI1.4
»
CAT6/STP(RJ45) works only with KD-BBRX Balun and HDMI with KD-CATHD(RX)
Baluns..
»
Audio Input Interface (HDMI Input Card):
»
Supports both PCM and Analog Stereo Audio inputs. The PCM Input shares the same
RCA connector as Left Analog stereo and only one of these audio inputs / formats can
be selected at a time.
»
The Analog Stereo Audio input is processed at 48kHz sampling rate.
»
Audio Output Interface (HDMI Output Card):
»
Supports both PCM and Analog Stereo Audio Outputs. The PCM Output shares the
same RCA connector as Left Analog stereo and only one of these audio outputs / format
types can be selected at a time.
»
1. When the PCM Output is selected and its source is from the external PCM Input, PCM
(at 48 kHz) will be in bypass mode to pass Dolby Digital, DTS, or 2Ch PCM and will be
without audio control.
»
2. The Analog Stereo Audio Input is processed (at 48 kHz) and will be converted to
digital audio at the PCM Output if desired. Full audio control will be available in this case.
»
3. When HD Audio (HD-Dolby Digital, HD-DTS etc.) or multi-channel PCM is carried
by HDMI, it will be muted at the PCM Output if HDMI is selected as the audio input
source.
»
Control Interface (HDMI Input/Output Card):
»
Supports both RS-232(up to 115200bps) and Serial IR and shares the same stereo mini-
jack. Only one control protocol can be selected through control port settings.
»
RS-232 and Serial IR support bi-directional paths. Output signal level is +5V TTL and
has +/-12V tolerance.
»
Control Interface (Power Board):
»
Supports one RS-232(DB9), one TCP/IP(RJ45), one USB(B Type) for service only
(software upgrade), one Serial IR and one IR Eye.
»
RS-232 baud rate for control of unit is fixed at 57,600bps.
»
RS-232 and TCP/IP share same control commands.
»
Serial IR supports bi-directional path. Output signal level is +5V TTL with +/-12V
tolerance.
»
IR Eye is only for Remote IR receiving sensor.
»
Front Panel Interface:
»
2 row LCD Display, two rotary knobs(left and right) with push-to-select action to control
menu choices for front panel control, and IR Eye
»
IR Eye is only for Remote IR receiving sensor.
Technical:
»
Regulation:
RoHS, WEEE
»
Input (Each):
1 HDMI; 1 CAT6/STP on RJ-45 connector; Left and Right Stereo on two RCA,
or one SPDIF digital audio on Left RCA connector; 1 wired IR or RS-232 on 3.5 mm stereo
jack connector per input
»
Output (Each):
1 HDMI; 1 CAT6/STP on RJ-45 connector; Left and Right Stereo on two
RCA,
or one SPDIF digital audio on Left RCA connector; 1 wired IR or RS-232 on 3.5 mm stereo
jack connector per output
»
Configuration:
8 input sections and 8 output sections in standard configuration
»
Bandwidth:
TMDS bandwidth 10.2 Gb/s
»
Control:
Front panel push buttons and LCD display; Infrared IR front; RS-232 Tx and Rx
lines; Full bi-directional operation
»
Video/Audio Matrix Switching:
Full Matrix switching of 2 independent matrixes:
Video & Audio
»
RS-232 Control Matrix:
RS-232 input/output can independently control the system
or input/output through attached KD-BBTX or KD-BBRX Balun. Full bi-directional RS-232.
»
Wired IR Control Matrix:
Each input/output section wired IR and unit wired IR can be
switched into matrix in bi-directional operation to any of the inputs/outputs
»
EQ adjustment:
On Rx Balun or CAT6/STP Input. Precise auto-adjustment, distance
measurement
»
Compliance with HDMI
®
Standards:
Supports HDMI
®
1.4 features (3D Ready,
4K Resolution Support), HDMI
®
1.3a/b, HDMI 1.2, HDMI 1.1, DVI 1.1, and HDCP
»
Link and Range:
Single Link Range: 1080p/60, 1920x1200 max. UTP 140 feet. STP 160 feet.
For 1080i/60; 720p; 1080p/24 UTP 270 feet, STP 280 feet
»
Lossless Compressed Digital Audio:
Support lossless compressed digital audio
(Dolby
®
TrueHD, Dolby
®
Digital Plus and DTS
™
-HD Master Audio)
»
DDC Signal (Data):
Input DDC Signal: 5 Volts p-p (TTL)
»
HDMI Video/Audio Signal:
Input Video Signal: 1.2 Volts p-p
»
HDMI Connector:
Type A, 19 Pin Female
»
RJ45 Connector:
Link Connector: RJ-45 Shielded
»
I2C Communication:
EDID and HDCP Bi-Directional Transparency from Display to Source
»
EDID Control:
Each input EDID is either a choice of any of the active zone displays
connected via HDMI or CAT6/STP to the outputs or from internal library of 8 Default EDIDs
»
RS-232:
RS-232 Tx and Rx line active and bi-directional up to 115,200 baud rate
»
Wired IR:
IR line modulated or not modulated, active and bi-directional 0-5V TTL
or -10to +10V.
»
Power:
External Power Supply. 12V/8.33A
