Page 4
Page 5
Application Example
D
V
I Video*
D
V
I Video*
L
/R/PCM
L
/R/PCM
C
AT6/S
TP
L
/R/PCM
C
AT6/S
TP
C
AT6/S
TP
C
AT6/S
TP
C
AT6/S
TP
L
/R/PCM
C
AT6/S
TP
C
AT6/S
TP
C
AT6/S
TP
Speakers
HD
M
I
HD
M
I
Blu-Ray
Satellite 1
Desktop PC
Desktop PC
Display 8
Display 4
DVI
HDMI/DVI
Audio
CAT6/STP
IR/RS-232
IR
HD
M
I
HD
M
I
Blu-Ray
IR
IR
HD
M
I
IR
HD
M
I
IR
HD
M
I
IR
IR/RS-23
2
IR/RS-232 & TCP/IP
IR
HD
M
I
IR
HD
M
I
IR
HD
M
I
IR
IR/RS-23
2
IR/RS-23
2
HD
M
I
HD
M
I
IR/RS-23
2
HD
M
I
IR/RS-23
2
HD
M
I
IR/RS-23
2
HD
M
I
IR/RS-23
2
HD
M
I
Display 7
Display 3
Display 2
Display 5
Display 1
Display 6
Display 2a
Display 1a
(mirrored)
(mirrored)
Satellite 2
Cable 1
Cable 2
Control System
KD-BBTX
KD-BBTX
KD-BBTX
KD-BBTX
KD-BBRX
KD-BBRX
KD-BBRX
KD-BBRX
KD-HDMS8X8
Transmits:
»1080p/60Hz resolution up to 140 ft
»1080p/24, 1080i, 720p and 480i/p resolutions up to 270 ft
» When used with KD-BBRX Receiver Baluns
RS232 Control
Serial IR
USB
TCP/IP
Optical IR
Surround Rcvr.
*To connect DVI use HDMI to DVI adapters
270’
180’
200’
150’
Main Control Panel
Rx Input Card (KD-HDUIC)
Tx Output Card (KD-HDUOC)
HDMI Input and Output Numbering
The KD-HDMS8x8 in its default configuration contains 8 Input cards and 8 Output cards. The Input
cards are addressed from 01-08, and the Output cards from 01-08.
Power
12V/8.33A (100W)
Power Supply
Rear IR Eye (Receiver)
Rear IR receiver for
remote control
Operation Mode Switch
Switch to “Program” mode
when updating firmware
For manufacturers use only
Serial IR
To Input from Control interface
for controlling unit via Serial IR
and IR routing
RS-232
The main RS-232/DB9
port for interfacing with
a control system.
USB
The USB port is for
software upgrades only.
It is not used for control
interface.
TCP/IP
This is the main TCP/IP port for interfacing
with control systems. It supports the same
control commands as the RS-232 port
and it can support TCP/IP to RS-232
conversion & routing and TCP/IP to serial
IR conversion & routing.
Serial IR / RS-232
Use the KD-HDMS as a Control Router for
devices integrated into your system
Serial IR / RS-232
Use the KD-HDMS as a Control Router for
devices integrated into your system
Left Analog Audio / PCM Audio Input
Supports Left channel Analog Audio Input or
use for Coaxial Digital Audio Input
Left Analog Audio / PCM Audio Output
Send Left channel Analog Audio or Coaxial
Digital Audio to your Display or other devices
CAT6/STP Input
Integrate a remote source by using the KD-BBTX
Transmit Balun to feed the CAT6/STP inputs
CAT6/STP Output
Use the KD-BBRX Receive Balun to carry Video,
Audio, and Control to your Display (or other) devices
Right Analog Audio Input
Supports Right channel Analog Audio Input
Right Analog Audio Output
Send Right channel Analog Audio
to your Receiver or other devices
Link LED
Indicates that input connection is stable
Link LED
Indicates that output connection is stable
HDMI Input
To Input source components
HDMI Output
To Output to Display
