521 East 3
rd
Street Mt. Vernon, NY 10553 • www.keydigital.com
Rev 1.0
– Nov, 2020
5
Quick Setup Guide
Begin with the KD-EXWPSTx and KD-EX18GRx, all source, display devices, audio system, and any
other connected peripherals powered off.
Connect
1.
Connect video sources
into the HDMI and USB-C input ports of KD-EXWPSTx
2.
Connect video displays/projectors
to the HDMI output port of KD-EX18GRx (sold separately)
3.
If collecting IR control signals
at the wall plate, connect an IR emitter to KD-
EX18GRx’s IR Out port
and apply the emitter head to the IR sensor of the device you wish to control.
4.
Connect CAT5e/6 cabling
from KD-EXWPSTx
’s UHDoTP output to KD-EX18GRx UHDoTP input.
Ensure that the cable meets the required minimum length of 17ft / 5m.
5.
Connect power.
Screw-in power supply to the KD-EX18GRx unit, and then connect power to outlet.
Configure
Configure KD-EXWPSTx with Key Digital Management Software
™ Pro (KDMS™ Pro). Download
1. Connect to KD-EXWPSTx from your PC using the USB micro port on the face of the unit
2. Open the KDMS Pro software and perform a USB scan (fig. 1a)
. Choose “NO” and Start Scan when the
USB Device Scan prompt appears (fig. 1b)
