521 East 3
rd
Street Mt. Vernon, NY 10553 • www.keydigital.com
Rev 1.0
– Nov, 2020
8
UHDoTP Output (Rear):
Connect a CAT5e/6 cable to the Rx unit’s UHDoTP Input port using CAT5e/5 UTP or
STP in 568-B termination.
•
UHD/4K: Up to 115ft (35m)
•
1080p: UP to 164 ft (50m)
•
Minimum CAT5e/6 cable length required: 17ft (5m)
•
Supports Dolby®, DTS™ (5.1 / 6.1 formats max)
•
Receives 12V Power over CAT from KD-EX18GRx
•
Not compatible with HDBaseT or third-party Rx. Connecting to incompatible Rx may cause
damage and result in void of warranty.
Supported standard 4K video formats:
Input Select Button:
Used to toggle between HDMI and USB C source input or to activate Auto Switch mode
•
Press and hold for 3 seconds to activate Auto switching. Solid illuminator of the back lighting indicates
mode has been set
•
Manually switching with the Input Select button will override the Auto Switch setting.
•
If Auto Switch has been set to FORCED ON via software command, the Input Select button does not
control switching
•
Press and hold for 10 seconds to reset the KD-EXWPSTx to factory default:
o
EDID is setting 3 (1080p with 2ch audio)
o
Input source is HDMI
o
Forced HPD is OFF
Power LED:
•
Color:
Green
•
Solid illumination during power ON state, as provided by healthy connection with Rx and healthy Power
over CAT extension
•
Steady blink if unit has a power short
Link LED:
•
Color:
Blue
•
Solid illumination from healthy UHDoTP link between Tx and Rx unit
