Page 1
Page 1
Always test all connections, especially self-made CAT5 cable and Component
cables coming into the device.
Please set all DIP switch configurations appropriately. DIP switches connect shield
to common ground when set to “On”. Switch “1” is for “R” port, switch “2” is for “G”
port, switch “3” is for “B” port, and switch “4” is for “PCM” port. Connecting shield
to common ground can help eliminate visible “noise” on the video signal. See
“Troubleshooting” section of this manual.
If installing the analog bobcat into wall or mounting bracket into sheet-rock,
provide proper screw support with bolts or sheet-rock anchors.
Quality of CAT5 cable.
CAT5 “crimping” or creating the connection yourself must be done as thoroughly
as possible or picture quality and/or cable distance will suffer.
Do not pull hard or force CAT5 cable, there is a high chance it may break.
Warranty
All Key Digital
®
products are built to high manufacturing standards and should provide
years of trouble-free operation. They are backed by a limited two-year parts and labor
warranty.
1.
2.
3.
1.
2.
3.
Important Product Warnings:
Distances for CAT5 are suggestive
and depend on the following factors:
How to Contact Key Digital
®
Repairs and Warranty Service
Should your product require warranty service, please contact Key Digital
®
to obtain a
Returned Materials Authorization (RMA) number
Please contact us at either:
Phone:
1-914-667-9700 ext 215
E-mail:
Technical Support
For technical questions about using our products, please contact us at either:
Phone:
1-914-667-9700 ext 216
Phone:
1-914-667-9700 ext 301
E-mail:
Customer Support
For customer support questions about using our products, please contact us at
either:
Phone:
1-914-667-9700 ext 223
E-mail:
Feedback
Please e-mail any comments/questions about the manual to:
E-mail:
›
›
➔
➔
›
➔
➔
➔
›
➔
➔
›
➔
