Key Digital HD Leeza KD-HD1080P, Operating Instructions Manual

Page: 46 / 56

KEY DIGITAL HD LEEZA, MODEL KD-HD1080P
HD Leeza Operating Instruction Manual SPECIAL SECTIONS
SPECIAL SECTION 1:
Frequently Asked Questions (FAQs)
HD LEEZA - Video Processor - Model KD-HD1080P
Q: “Native Resolution”:
What is the best HD Leeza output resolution and scanning setting for my
particular display?
A: It is a common problem that display manufacturers specify “Native Resolution” for marketing
purposes . HD Leeza lets you find that “sweet spot” for the display, regardless of quoted “Native
Resolution” -- please use the table provided at the end of this manual.
Q:
What do I do if the screen goes blank and I can’t make a picture or see the On Screen Display
Menu?
A: This might occur if you are switching to a display format that might not be compatible with the
display connected to the output of HD Leeza. If this happens, try one of the following:
•
Use the “PP button” (Previous Page) on your remote control. It brings you back to the previous window
selection on the menu, instantly un-freezing the choice and allowing you to continue navigating. This allows
you to go back to the previous resolution setting if you select one that is out of range and causes your screen to
go black.
•
Use the “GB button” (Granny Button) on your remote control. Activating this button reverts HD Leeza to
the factory default settings (720x480p @ 60 Hz).
Q:
I have a “Catch 22” – I only have a component (YPbPr) display , yet HD Leeza’s factory default
output is 720x480 RGB , so I can’t bring up HD Leeza’s OSD.
A: With Version 5.5.55 or greater (more recent) of the firmware, the user can choose to come up with
RGBHV or YPbPr output during GB reset . Press the Granny Button for five seconds, followed
by:
•
Right Arrow will furnish RGB output
•
Up or Down Arrows will set HD Leeza to YPbPr output with H and V still active. The
RGBHV and DVI monitor will still work with YPbPrHV but will show a strange green color.
The unit can be changed back to RGBHV through the System Setting Menu. Please
remember: only three standard YPbPr resolutions will be accepted by any component
monitor: 720x480p/60, 1920x540p/60 (this is instead of 1080i format) and 1280x720p/60.
Other resolutions are not standard for Component connection.
Q:
I can’t navigate out of the Horizontal Position setting submenu. The right-left and up-down arrow
keys all have similar functions -- changing the horizontal position value. Is the only way to get out of
this submenu for me to wait for the menus to time out?
A: No -- you can conveniently use the “ PP button ” on the top of the left arrow button to navigate out.
Q:
When I switch inputs , the menu appears and I have to hit the “Menu” button to get rid of it.
A: That is taken care of from Version 5.4.13 and higher (more recent) of the HD Leeza firmware –
please be sure to upgrade your firmware. Switch by using Direct Access Button R6, followed in 1
second by a digit between 0 and 9 for all ten inputs. For example, SDI is Input #4. That will switch