Key Digital HD Leeza KD-HD1080P, Operating Instructions Manual

Page: 42 / 56

KEY DIGITAL HD LEEZA, MODEL KD-HD1080P
HD Leeza Operating Instruction Manual Appendices Page D-1
Appendix D: Handy Summary of Remote Control Commands
HD LEEZA - Video Processor - Model KD-HD1080P
Use the special “R” keys located at the bottom of your HD Leeza Remote Control as follows:
KEY HOT BUTTON FUNCTION
R1 Inhibit OSD
(R1, 2) is the default setting
•
(R1, 1) puts HD Leeza in a mode where the OSD is not displayed when the input channel is changed.
•
(R1, 2) restores the default mode where OSD is displayed on channel changes.
R2 Separate Sync for SDI
(R2, 2) is the default setting
•
(R2, 1) enables separate sync on SDI inputs. Then the frame can be moved horizontally and
vertically, exactly as with other input channels.
•
With (R2, 2), SDI inputs use embedded sync and cannot be moved on the display screen.
R3
-
R4 RGBHV Bypass
•
Connects the input RGBHV to the output RGBHV, bypassing HD Leeza processing.
R5
-
R6 Direct Input Access
•
0 = DVI Input #1
•
1 = DVI Input #2
•
2 = RGBHV Input
•
3 = Component HD Input
•
4 = Serial Digital Input
•
5 = Component SD Input
•
6 = S-Video Input #1
•
7 = S-Video Input #2
•
8 = Composite Video Input #1
•
9 = Composite Video Input #2
R7 RGB/DVI Display
(R7, 1) is the default setting
•
With the (R7, 1) setting, the horizontal and vertical positions are zeroed out before being moved to
their normal values. This enables DVI displays to center the frame correctly. For RGB display
outputs, (R7, 1) is the best setting. With (R7, 1), the extra operations needed for DVI displays are
eliminated resulting in faster response.
•
(R7, 2) adds a sync-polarity “flip-flop” following (R7, 1) operation.
R8 Direct DVI Phase Clock Configuration
•
0 = Phase 0
•
1 = Phase 1
•
2 = Phase 2
•
3 = Phase 3 (factory default)
•
4 = Phase 4
•
5 = Phase 5
•
6 = Phase 6
•
7 = Phase 7
The remote commands (R8, 8) and (R8, 9) can be used to select a special X or N DVI input/output mode.