background image

KEY DIGITAL 

 

HD LEEZA, MODEL KD-HD1080P 

 

 

HD Leeza Operating Instruction Manual Appendices Page 

A-1 

Appendix A:  HD Leeza Technical Specifications 

 

 
 
 
 

 

HD LEEZA - Video Processor - Model KD-HD1080P 

 

Inputs 

• Flexible inputs supported:  

o

 

Two Digital DVI with HDCP [DVI-D connectors] 

o

 

One Digital SDI 270Mb/s (BNC connector) 

o

 

One RGBHV (can also pass-through) (D sub connector) 

o

 

Two Component Video (YPbPr) with sync on Y,  1V p-p @ 75 ohms, negative or positive sync, 
(each 3 x BNC): 

ƒ

 

one SD (NTSC & PAL:  480i, 576i) 

ƒ

 

one HD (480p, 576p, 720p, 1080i/540p) 

o

 

Two S-Video Y/C video for NTSC and PAL (2 x DIN connectors) 

o

 

Two Composite Video (CV) for NTSC and PAL (2 x BNC connectors) 

• All world formats accepted in composite and S-Video: NTSC, PAL, and SECAM 

 

Scaling

 

• Scaling SDTV and HDTV to popular native resolutions 

o

 

DTV/HDTV standard display formats 

ƒ

 

704x480p, 1280x720p, 1920x540p, 1920x1080p 

o

 

Plasma/LCD standard resolutions 

ƒ

 

852x480, 1024x512, 1024x1024, 1280x768, 1440x768, 1365x768, 1366x768 

o

 

PC standard display formats  

ƒ

 

640x480, 800x600, 1024x768, 1280x1024, 1400x1050 

o

 

Other display formats 

ƒ

 

720x480 NTSC, 852x576 PAL, 1280x960, 1440x960, 1365x1024, 1900x1200 

• Film detection with inverse 3:2 or 3:3 telecine; supports 50Hz / 75Hz with PAL sources and 2:2 pull-down 
• Scaler equipped with advanced, proprietary motion-assisted de-interlacing algorithm "Clear Matrix Pro" 
• Dynamic Non Linear Stretch Mode "Dynamic Stretch Xtreme" (DSX) included 
• Aspect Ratios in and out:  1.33, 1.66, 1.78, 1.85, 2.00, 2.35, and accommodates custom settings 

 

Outputs

 

• Flexible outputs supported:  

o

 

Digital DVI with HDCP [DVI-D connector] 

o

 

RGBHV (VGA) or YPbPr (Component Video) with sync on Y, 1V p-p @ 75 ohms, negative or 
positive sync, [5 x BNC connectors] 

• Output refresh rates of 48 Hz, 50 Hz, 60 Hz, 72 Hz and 75 Hz for each resolution 
• One High Definition pass-through for RGBHV 

 

Other Connections  

• D-sub 9-pin (RS-232C) 
• 1/8" mini-plug (Remote Power and 12V Screen Control)  

Summary of Contents for HD Leeza KD-HD1080P

























































Reviews: