Key Automation 14A, Instructions And Warnings For Installation And Use

Page: 30 / 116

30
EN
6.2 - RX4X RECEIVER
If necessary, users may select the RX4X RECEIVER MENU, used
to manage the parameters relating to the radio unit.
Proceed as follows:
ADDING A TX USING THE DISPLAY
This procedure allows one or more transmitters to be memorised in the receiver.
(WARNING: if there is not already at least one transmitter in the memory, the first transmitter entered will establish the type of code -
rolling code or fixed code).
1. Access the menu
2. Select the type of channel in which the button is to be saved (CHANNEL 1= step by step; 2= pedestrian opening; 3= open; 4= lights
on/off; 5= memorisation of all 4 codes with preset functions as specified above). Press V to confirm.
3. Press the button of the TX to be memorised.
4. After the button is pressed, the display will show: TRANSMITTER MEMORISED.
5. To add another code, start the procedure again from point 2. To quit the menu, press “X”.
The “X” button is effective at any point in the procedure.
If no commands are given for 10 seconds, the receiver automatically quits the memorisation mode.
DELETING A TX USING THE DISPLAY
This procedure allows a radio code to be deleted from the memory of the RX4X receiver using the transmitter memorised.
1. Access the menu
2. Press the button of the TX to be deleted when prompted.
3. After the button is pressed, the display will show: TRANSMITTER DELETED.
4. When the code has been deleted, the display will show the memory position it was cleared from.
5. To add another code, start the procedure again from point 2.
To quit the menu, press “X”. The “X” button is effective at any point in the procedure.
If no commands are given for 10 seconds, the receiver automatically quits the memorisation mode.
CLEARING THE MEMORY OF THE RX4X RECEIVER
This procedure is used to clear the entire memory of the receiver.
1. Access the menu
2. Confirm the request by pressing “V” or exit using “X”.
3. On confirmation, the display will show: MEMORY DELETED.
MEMORY LOCK/UNLOCK
This procedure is used to lock or unlock the memory of the RX4X receiver.
1. Access the menu
0=OFF memory unlocked
1= ON memory locked
READING THE RECEIVER MEMORY
This procedure is used to view the radio codes present in the memory of the RX4X receiver.
1. Access the menu
2. Use ▲ and ▼ to scroll through the codes in the memory. The number of the transmitter in the memory, the radio
code saved and the relative button and channel will appear on the first line of the display, while the second line will
indicate that the code can be deleted, confirming with V.
3. To quit the menu, press “X”.
The “X” button is effective at any point in the procedure.
ADD TX Allows a new code to be memorised in the receiver
DELETE TX Allows deletion of a code from the receiver
DELETE ALL
Clears the receiver’s entire memory
READ MEMORY
Displays the codes in the memory
MEMORY LOCK/UNLOCK Unlocks or locks the receiver’s memory
14A RX4X
RX4X
RX4X
RX4X
RX4X
RX4X
ADD TX
DELETE TX
CLEAR ALL
MEMORY
LOCK/UNLOCK
READ MEMORY
A
B
C
D
M = PRESET
FUNCTIONS