30
CARING FOR YOUR BREWER
CLEANING THE EXIT NEEDLE
1.
If a clog arises in the Exit Needle, push
the lever of the Pod Holder to reveal the
Exit Needle.
2.
Use a paper clip or similar tool to
loosen the clog. Rinse thoroughly
with hot water.
3.
After all the pieces are cleaned, place the
Base then the Pod Holder assembly into
the Brew Head. Lower the Handle.
CAUTION: Sharp needles. Do not put fingers in chamber.
Summary of Contents for K400 Plus Series
Page 1: ...USE CARE GUIDE...
Page 9: ...9 1 LET S GET BREWING...