27
5.
Separate the Pod Holder from
the Housing.
6.
Clean the Pod Holder (1), Housing (2),
and Base (3) with a damp, soapy,
lint-free, non-abrasive cloth and
rinse thoroughly.
8.
Place the Base, then the Pod Holder
Assembly into the Brew Head.
Lower the Handle.
CAUTION: Sharp needles. Do not put fingers in chamber.
8.
After all pieces are cleaned, reassemble
the Pod Holder Assembly by inserting the
Pod Holder back into the Housing.
2 | TIPS & MAINTENANCE
Summary of Contents for K400 Plus Series
Page 1: ...USE CARE GUIDE...
Page 9: ...9 1 LET S GET BREWING...
