30
31
« X » indiquera que le format d’infusion a été
désactivé (fig. 14). Pour le réactiver, appuyez à
nouveau sur le format d’infusion.
3.
Une fois les formats désirés sélectionnés,
appuyez sur « OK ». Les formats d’infusion sont
maintenant réglés.
REMARQUE :
Vous ne pouvez
pas désactiver tous les formats d’infusion. Pour
réactiver un format que vous venez de désactiver,
appuyez simplement sur l’icône de ce format
puis sur « OK ». Le format de 237 ml/8 oz est
celui utilisé par défaut si tous les formats ont
été désactivés.
Programmation des fonctions de mise en marche et
d’arrêt automatiques
Le système d’infusion est doté de trois modes de fonctionnement pour vous
permettre de savourer du café gourmet, du thé ou du chocolat chaud comme
il vous convient.
1. Système d’infusion laissé allumé
(ON)
en tout temps.
Le système d’infusion
peut être laissé allumé en tout temps de manière à ce qu’il soit toujours
prêt à infuser une tasse de café gourmet, de thé ou de chocolat chaud. À
tout moment, pour éteindre le système d’infusion, appuyez simplement
sur l’interrupteur. Appuyez de nouveau sur l’interrupteur pour remettre
le système d’infusion en marche. Vous devrez attendre que l’eau soit
chaude avant que le système d’infusion soit prêt à être utilisé.
2.
Réglage de la fonction « ARRÊT AUTOMATIQUE »
pour que le système d’infusion s’éteigne
automatiquement deux heures après la dernière
infusion (fig. 15).
a. Dans le mode Menu, appuyez sur « ARRÊT
AUTOMATIQUE ». L’écran ACL affiche
maintenant les options de programmation de
l’arrêt automatique.
b. Pour activer la fonction « ARRÊT AUTOMATIQUE »,
appuyez sur « ON ». Le message « ACTIVÉ »
apparaît à l’écran; appuyez alors sur « OK ».
Pour désactiver la fonction d’arrêt automatique
appuyez sur « OFF ». Le message « DÉSACTIVÉ »
apparaît à l’écran; appuyez alors sur « OK ».
3.
Programmation d’une heure précise de mise en
marche/d’arrêt.
REMARQUE :
Pour utiliser cette
fonction de programmation, l’horloge doit être
réglée à la bonne heure.
a
.
Après avoir réglé l’horloge à la bonne heure
(voir « Réglage de l’horloge » aux pages 28 et 29),
revenez au mode Menu et appuyez sur
« MARCHE/ARRÊT AUTO ».
b. Pour régler l’heure de mise en marche « ON »,
appuyez sur « DÉSACTIVÉ » Une heure s’affiche à
l’écran. Appuyez sur « H » pour régler les heures
et sur « M » pour régler les minutes. Une fois
l’heure réglée, appuyez sur « OK » pour l’accepter.
SECTION 2 Menu des commandes et voyants
fig.
14
4 Oz.
12 Oz.
6 Oz.
10 Oz.
8 Oz.
OK
3
3
3
3
fig.
15
OK
OFF
ON
Arrêt automatique
Arrêt 2 h après la
dernière infusion
P30 20162461 T5274_K150_UCG_FINAL.pdf 4C(CMYK) ZB2319 2016-11-02 Size:8.5X5.5in