Kettler Quadriga Translation Of The Original Operating Instructions Download Page 71

Page: 71 / 124

NOTICE

877-00136_1.0_17.09.2018

Operation

7.4.1

Integrated battery

(Alternative version)



Before the battery is to be removed or inserted, switch
off the battery and the drive system.

7.4.1.1

Removing the integrated battery



Open the battery lock with the key.



Pull the integrated battery out of the frame from
below.



Remove the key from the lock.

7.4.1.2

Inserting the integrated battery



Place the battery with the contacts first into the
mount above.



Push the integrated battery downwards so that it
audibly clicks into place.



Use the key to fasten the battery lock.



Remove the key.



Check the inserted battery to make sure it is firmly
in place.

If a key is left inserted when transporting the bicycle or
when riding, it may break off or the lock may open
accidentally.



Remove the key from the battery lock immediately
after use.



We recommend that you attach the key to a key
ring.

Summary of Contents for Quadriga





























































































































Search results

Summary of Contents for Quadriga

Reviews:

Related manuals for Quadriga

Brands by name

Popular brands

Kettler Quadriga, Translation Of The Original Operating Instructions

Search results

Summary of Contents for Quadriga

Reviews:

Related manuals for Quadriga

Brands by name

Popular brands