Kettler Quadriga Translation Of The Original Operating Instructions Download Page 59

Page: 59 / 124

877-00136_1.0_17.09.2018

Before the first ride

6.2.2

urning the handlebars to the side

Alternative

CAUTION

Crash caused by incorrectly set clamping force

Excessively high clamping force will damage the quick
release and cause it to lose its function.

Insufficient clamping force will cause a detrimental
transmission of force. This will result in a crash and
injuries.



Never fasten a quick release using a tool (e.g.
hammer or pliers).



Only use the clamping lever with the specified set
clamping force.



Open the clamping lever.



Pull the locking lever on the stem up, and
simultaneously pivot the handlebars into the
desired position.



You feel the locking lever click into place.



Pull out the handlebars to the required height.



Lock the quick release.

Figure 19:

Pulling locking lever upwards – example: by.schulz speed lifter

Summary of Contents for Quadriga





























































































































Search results

Summary of Contents for Quadriga

Reviews:

Related manuals for Quadriga

Brands by name

Popular brands

Kettler Quadriga, Translation Of The Original Operating Instructions

Search results

Summary of Contents for Quadriga

Reviews:

Related manuals for Quadriga

Brands by name

Popular brands