Step #16 – NET INSTALLATION
REQUIRED PARTS – 1 Set
INSTRUCTIONS
QTY PART #
DESCRIPTION
1ea
TABLE
ASSEMBLY
(from Step 15)
1 ea #18
NET PARTS
Insert the TENSION ROD HOOK into the side of the
NET. Take the TENSION TOP STRING from the top
of the NET and tie it to the WHITE PLASTIC
TENSION ADJUSTMENT TAB. Leave a few inches of
string from the end of NET to the end of the WHITE
PLASTIC TENSION ADJUSTMENT TAB. Insert the
top end of the TENISON ROD HOOK into the hole in
the top of the NET POST. Insert the end of the
bottom of the TENSION ROD HOOK into the hole at
the base of the NET POST. This will connect the NET
to the NET POST. Slip the WHITE PLASTIC
ADJUSTMENT TAB onto the small hook on the side to
the NET POST. Screw the HEIGHT ADJUSTMENT
KNOB into the underside of the NET POST to secure
the TENSION ROD HOOK.
REPEAT THE ABOVE STEPS FOR THE OPPOSITE SIDE
ON THE NET ASSEMBLY.
-
27
-
Summary of Contents for K-7122-490
Page 28: ... 28 ...
