Ketterer KuLi Series, Assembly Instructions Manual

Page: 11 / 44

Safety Instructions
3215.72-01i01 Rev. A
P a g e | 7
2.2 Obligations of the operator
Every person who works with the Kuli has a responsibility to
ensure safety and health protection. They must be trained in the
use of the Kuli.
A safety-related condition and use of the Kuli is a requirement
for safe operation. Therefore, the operator has the
responsibility to ensure that the following points are complied
with:

Ensure that the Kuli is only operated by trained and authorized
personnel!

Prohibit safety-endangering and dangerous working methods!
Check the actions of the personnel!

Always keep this document in a complete and readable
condition!

Obligate the operating and maintenance personnel to report
occurring and recognizable safety defects immediately to their
superiors!
 During start-up and operation, the operator must ensure that
there are no persons in the danger zone. The danger zone
depends on the function and dimensions of the end product in
which the Kuli is installed.

2.3 General safety instructions
 General legal regulations or guidelines on work safety, accident
prevention regulations and environmental protection laws must
be observed.
To be provided by the integrator:

A stop device for the emergency of the KuLi (emergency stop or
emergency shutdown) shall be provided by the integrator.
Personal Protective Equipment (PPE):
 The use of personal protective equipment (PPE) depends on the
environmental conditions of the actual operating location in the
overall system and is to be defined by the operator.