Ketterer KuLi Series, Assembly Instructions Manual

Page: 5 / 44

Introduction
3215.72-01i01 Rev. A
P a g e | 1
1 Introduction
1.1 Content

This documentation is intended to help you work safely on and
with the "Kuli". It contains safety instructions that must be
followed for all work performed on and with the Kuli system.

The documentation must be made accessible to all persons who
work on and with the Kuli. They must have understood the
documentation and follow the specifications and instructions
relevant to them.

The documentation must be always complete and in a clearly
readable condition.
Please read these instructions carefully and follow the safety
instructions!
Depending on the version or modification status of the
product, there may be differences compared to these
instructions.
1.2 Scope
These instructions are valid for the partly incomplete machine
with article numbers:
3215.00-0005 to 3215.00-0020
3215.00-0034F001
Drawings dated 21/02/2022 are applicable.
1.3 Standards and directives
The KuLi is an "incomplete machine" according to Article 2,
Paragraph g), MRL 2006/42/EC.
The conformity assessment procedure was carried out in
accordance with Machinery Directive (MRL) 2006/42/EC.
The KuLi is designed according to compliance with 2011/65/EU
(RoHs) and 2014/30/EU (EMC).
The manufacturer of the overall system in which the KuLi is
installed must check and ensure compliance with the essential
requirements of the MRL before placing the overall system on
the market.