Kett C-600, User Manual

Page: 11 / 16

11
7-1. Main Unit Glass Filter
If the glass filter on the main unit is dirty, you will not receive
an accurate measurement. You must keep the glass filter
clean at all times when using the device. Use your finger
to lift upwards on the handle on the inside of the front cover,
in order to remove the front cover. This gives you access
to the glass filter for cleaning.
[Caution] There are sharp edges protruding from the front
cover and the metal parts of the main unit. Be care-
ful not to injure yourself when cleaning the glass
filter.
7-2. Sample Platter Sponge
As the sample platter sponge wears, the amount of sample
material you can fit into the sample platter increases, which
results in inaccurate measurements. The sponge needs
to be replaced when you can see lines on the inside of the
sample platter when it is empty. The sponge is attached
to the bottom of the platter with double-sided tape. Simply
pull out the sponge to replace it.
7-3. Main Unit Glass Filter Packing
When the packing attached to the main unit's glass filter
wears down, please replace it. If this packing wears down,
a space will form between the glass filter and the sample case.
[Caution] Attach the packing in the orientation shown in the fig
-
ure.
7. Maintenance and Other Functions
Sponge
Worn Packing
Narrow
Wide
Caution
Front Cover
Handle
Glass Filter