9
6. Measurement
[Caution] Before performing any measurements, use the
glass wipe to clean the glass surface of the
sample case and the main unit's glass filter.
Fixed Quantity Shooter
Sample Platter
Sample Case
Fixed Quantity
Shooter Hole
6-1. Inserting the Sample for Testing
(1) Place the sample case on a flat sur face and set the
sample platter.
(2) Place the fixed quantity shooter on the sample platter.
(3) Put a level cup of rice in the sample cup, then pour the rice from
the cup through the hole in the fixed quantity shooter. Insert
all of the rice from the cup until the rice begins to overflow out
of the hole in the fixed quantity shooter.
[Caution] The sample cup is designed for acquiring a
sample of rice only. Do not use the sample cup as
a container for any other purpose.
(4) Remove the fixed quantity shooter from the sample platter
and tightly close the lid on the sample case.
[Note]
By carefully following the above instructions you can
virtually eliminate any discrepancies in measurement
values due to human error. If you do not properly
insert the test sample, you will not receive an accurate
measurement.
Summary of Contents for C-600
Page 1: ...Rice Whiteness Tester C 600 User Manual...
Page 15: ......
