KETRON SD9 Manual & Tutorial
102
Fig. 148a. LaunchPad – SAVE
o
Touch
Cancel
if you change your mind and want to work on your project some more. It won’t get
saved at this time.
o
Touch Save to save your project with a default name in the LAUNCH_PAD folder of the internal
SSD drive.
o
Touch
Save As
in order to name your project in the next screen displayed
Fig. 148b. LaunchPad – SAVE Keybed
•
Touch
ENTER
when done and your project is saved in the LAUNCH_PAD folder of the internal SSD
drive.
5.B EDITING & CONTROLLING THE INDIVIDUAL PADS
In this section of the manual, we will now take a look at how you can customize or edit each pad to function in
specific ways. It is in this section that you determine the rules that govern each pad (
such as how to activate it,
should it or should it not respond to chord changes and harmonic rules, should it be played as a loop [musical] or
in a single shot [e.g. for sound effects or one liners]…etc).
You can decide to load one pad and edit it or load all the relevant pads and then edit them one by one. For this
example, we will simply load one pad (
as shown above in Fig. 147
) and then proceed to edit it so as to give you
enough details which can then be applied to any other relevant pad you decide to load.
•
Touch and hold the pad you want to edit for 2 seconds. It should be highlighted in red (
as shown in Fig.
147 above
).
Summary of Contents for SD60 PRO live station
Page 188: ...KETRON SD9 Manual Tutorial 188 ...
