10
This section of the menu is for setting up the
variables for any options which were ordered
(Analog out or Serial communications).
OUT LO= The rate value to be represented by
the 4 mA end of the 4-20 mA output. Key in
the desired value and press RST/ENTER to
enter displayed value. To enter a negative
value, press the A button until the digit passes
4, a negative sign will appear.
OUT HI= The rate value to be represented by
the 20 mA end of the 4-20 mA output. Key in
the desired value and press RST/ENTER to
enter displayed value. To enter a negative
value, press the A button until the digit passes
4, a negative sign will appear.
BAUD = Baud rate for RS 232 or RS 422
communications option. Press any key to
view existing value.
Press the PRGM key to view available baud
rates; Press RST/ENTER to enter displayed
value.
UNIT = Unit ID number. This ID number (1 to
99) must be addressed to bring the unit "on
line". If the unit number is set at 00, the unit
cannot be addressed. Key in the desired unit
number and press RST/ENTER to enter dis-
played value.
P LIST = Print list. This is a list of items which
the unit will transmit whenever the strobe line
is activated.
Press RST/ENTER to add items to list; Press
PRGM to remove items from list.
RATE = Rate
PEAC = Peak
UALLY = Valley
PRE A = Preset A
PRE B = Preset B
END = Press RST/ENTER to exit (end) print
list; Press PRGM to recycle through list
choices.
PRGM
PRGM
PRGM
PRGM
PRGM
ENTER
PRESS
DISPLAY
REMARKS
ENTER
ENTER
ENTER
ENTER
PRGM
ENTER
or
INPUT
RELAYS
LoC
SETUP
oPT
oUT Lo
Press any key to view or
change existing value
oUT HI
Press any key to view or
change existing value
BAUD
Press any key to view or
change existing value
9600, 1200,
2400
or
300
UNIT
Press any key to view or
change existing value
P LIST
Press any key to enter print
list
RATE
PEAK
UALLY
PRE A
PRE B
END
STEP
5
SETTING
OPTIONS
Summary of Contents for INTELLECT-69PM2
Page 4: ...THIS PAGE IS BLANK...
