9
INPUT
RELAYS
LOC
SETUP
DECLOC
SET LO
Press any key to view
or change existing
value
SET HI
Press any key to view
or change existing
value
LO CUT
Press any key to view
or change existing
value
NOR
Press any key to view
or change existing
value
PRESS
DISPLAY
REMARKS
This section of the menu is used to set
up important operating variables.
DECLOC= decimal location; Press the
key under the digit with the desired
location. Press the"E" key if a decimal
is not desired. Press RST/ENTER to
enter the displayed location.
SET LO= Display value for the lowest
input (0 or 1V; 4mA).(i.e. 4mA = -10
°
)
Key in the desired low value and press
RST/ENTER to enter displayed value.
To enter a negative value, press the A
button until the digit passes 4, a nega-
tive sign will appear.
SET HI= Display value for the highest
input (5 or 10V; 20mA).(i.e. 20mA =
100
°
). Key in the desired high value
and press RST/ENTER to enter dis-
played value. To enter a negative
value, press the A button until the digit
passes 4, a negative sign will appear.
LO CUT= Low cut-off; Lowest display
value to be recognized. All readings
below the "cutoff" will assume the "set
lo" value. Key in the desired value and
press RST/ENTER to enter displayed
value. To enter a negative value,
press the A button until the digit passes
4, a negative sign will appear.
NOR= Normalizing (averaging) factor
(00.0 to 99.9); Key in the desired value
and press RST/ENTER to enter dis-
played value. Higher settings provide
more normalizing (averaging) for a
more stable display.
PRGM
PRGM
PRGM
PRGM
ENTER
ENTER
ENTER
ENTER
ENTER
STEP
4
SETTING
SETUP
Summary of Contents for INTELLECT-69PM2
Page 4: ...THIS PAGE IS BLANK...
