Kessel Control Unit Ecolift 230V, Instructions For Installation, Operation And Maintenance

Page: 32 / 120

32/120 2016/02
INSTALLATION
3.6. Settings, menu
General information
The menu prompting has an operating and a standby mode.
In operating mode the system settings can be displayed and adjusted on the display (refer also to 5.2 Menu
structure).
If over a period of approx. 60 seconds none of the keys are pressed, standby mode is activated automatically, the
background lighting of the display is then switched off.
Navigation keys for the menu
22
Cursor up Scrolling in the menu
23 Cursor
down Scrolling in the menu
24 ESC Deletion of an entry, back
25 OK Confirmation of an entry, next level
Activating operating mode
• Press the OK key <25> on the control panel,
background lighting of the display lights up and the
start screen System info <38> (Fig. [13]) is displayed
• Press OK <25>, level 1 of the menu
(see 5.2 Menu structure) is activated.
Note: The display can vary depending on the configuration
Navigation within the menu
Action Operation
Select menu item Cursor up / cursor down, selected menu item is shown inverted
Activate menu point for editing OK. If a menu sub-item exists, this is shown inverted.
Display or edit set value OK, value is displayed or shown inverted for setting
Quit menu ESC, leave current level, moves up a level
22
23
24
25
[12]
Datum
Uhrzeit
Niveau:
Pumpe I:
Pumpe II:
Fehler/Meldung/Ereignis (Statuszeile)
--,--,--
--,--,--
-- mm
Aus
Aus
38
[13]