Kesseböhmer USA Inc. | 106 Market Street | Suite 300 | Wilmington, NC 28401 | 910-338-5080
|
www.cleverstorage.com
New
DISPENSA
Installation in Shop or Home
Problem
Possible Issue
Possible Solution (brief)
Confirmed
Notes
Runner does not
move smoothly
and/or quietly
while opening and
closing
Panhead screws used to install bottom
runner
Replace with countersunk screws
(mounted flush)
Countersunk screws on bottom runner
not flush
Replace with countersunk screws
(mounted flush)
Frame is adjusted too high (binding on
top guide runner)
Lower the frame height to proper gap
Installation is not complete
Complete installation and add weight
before testing function
Bottom runner dirty
Remove all parts of bottom runner and
clean with lint free cloth and window
cleaner. NEVER OIL!
Connection between frame and bottom
runner is loose
Check the connection of ClickFiXx
Bottom runner not screwed tight to
floor/not enough screws
Check/tighten all screws
Bottom runner not parallel to cabinet
side
Check position and relocate
Bottom runner and top guide are not in
correct positions
Check position and relocate
Cabinet is not level/plumb
Level/plumb cabinet
Floor sags under weight
Add more support in center of cabinet
beneath the floor
Runner operation
is bumpy or gets
stuck while
opening and
closing
Panhead screws used to install bottom
runner
Replace with countersunk screws
(mounted flush)
Countersunk screws on bottom runner
not flush
Replace with countersunk screws
(mounted flush)
Bottom runner dirty
Remove all parts of bottom runner and
clean with lint free cloth and window
cleaner. NEVER OIL!
Wheel has a flat spot in it
Replace runner
Wheel not moving properly (too
tight/too loose)
Replace runner
