EN
26
①
Reveal two small holes on the door frame from inner side
by pulling out a bit the door seal.
②
Aim the handle to the holes and insert the screws from
inside.
③
Screw them up with screw-driver.
④
Put back door seal to cover the screws.
HANDLE INSTALLATION
The handle is delivered in a separated package with
screws together inside the carton
To install handle to the door frame of the appliance:
REVERSING THE DOOR
Our wine cooler is delivered with the door opening from left to right. To reverse the opening direction:
Pic. 1
Pic. 2
•
Open the door at 90 degrees and keep it steady.
•
Unscrew the two screws
①
form the right lower hinge
②
(Pic.1)
•
Pull the door
⑤
outwards slowly (follw the arrow direction in Pic. 2), ato get off the lower hinge
②
and continue to pull the door
⑤
downwards slowly until getting off from the top right hinge
④
and
take off the lower hinge plate
③
f rom the door axis hole (Pic. 2).
•
Screw off top right hinge
④
and right lower hinge
②
from the housing
⑥
and keep them in the
polybag in case of possible reversing door in the future. (Pic. 3).