EN
32
PART 6. TROUBLESHOOTING
The appliance makes lots of noise
•
Please adjust the front foot, keep the appliance levelling.
•
Please keep the appliance in disctance from walls
Liquid flowing sound inside the cabinet
•
It is normal because of the refrigerant working inside.
The appliance does not start
•
Make sure the appliance is connected to the power properly.
•
Make sure switch on the power.
•
The compressor re-starts after 5 minutes for a power cut.
Compressor runs continuously
•
If no cold is being produced, call the after-sale service.
Door does not seal tightly
•
After long time use, the door seal might get stiff & distorted partially.
1. Heat the door seal with hot-wind blower or hot towel.
2. The door seal gets softened and close the door.
The appliance does not cooling sufficiently
•
Please adjust temperature setting.
•
Keep the appliance away from sunlight or heat.
•
Please do not open the door frequently.
Unpleasant smells inside cabinet
•
A little bit plastic smell for newly-buy appliance is normal and will disappear after a short time.
•
Clean the compartment and ventilate it for a few hours.
Condensate on the glass door
•
Please do not open the door frequently or for a long time.
•
Please do not set the temperature too low.
•
High ambient temperature and humidity would cause condensate.
The light is not working
•
Check the power supply first.
•
Call the retailer’s after-sale service if the light is broken.