Kernau KBO 0945 PT B, User Manual

Page: 71 / 153

EN
71
CLEANING OVEN GLASS
Lift by pressing on plastic latches on left and right side as shown in figure 10 and pulling
the profile toward yourself as in figure 11. Glass is released after profile is removed as
shown in figure 12. Remove the released glass by pulling toward yourself carefully.
Outer glass is fixed to oven door profile. You can perform glass cleaning easily after
glasses are released. You can mount glasses back by performing the operations reversely
after cleaning and maintenance are completed. Ensure that profile is seated properly in
place.
CATALYTIC PANEL *
It is located behind the wire racks of the oven, at the right and left walls of oven cavity.
FIGURE 10 FIGURE 11 FIGURE 12
Catalytic panel removes offensive odour and provides using your appliance at its best
performance. Over time, oil and food odours permeate into enamelled oven walls and
heating elements. Catalytic panel absorbs any food and oil odours, and burns them during
cooking to clean your oven.
DETACHING CATALYTIC PANEL
To remove catalytic panel; first remove the wire racks. Once wire racks are removed,
catalytic panel will be free. It is advised to replace the catalytic panel once every
2-3 years.
RACK POSITIONS
It is important to place the wire grill into the oven properly. Do not allow wire rack
to touch rear wall of the oven. Rack positions are shown in the next figure. You may
place a deep tray or a standard tray in the lower and upper wire racks.
Rack 4
Rack 3
Rack 2
Rack 1