Kernau KBO 0945 PT B, User Manual

Page: 72 / 153

EN
72
INSTALLING AND REMOVING WIRE RACKS
To remove wire racks, press the clips shown with arrows in the figure, first remove the
lower, and than the upper side from installation location. To install wire racks; reverse
the procedure for removing wire rack.
REPLACING OVEN LAMP
WARNING:
To avoid electric shock, ensure that the appliance circuit is open before changing the
lamp. (having circuit open means power is off)
• First disconnect the power of appliance and ensure that appliance is cold.
• Remove the glass protection by turning as indicated in the figure on the left side.
If you have difficulty in turning, then using plastic gloves will help you in turning.
• Then remove the lamp by turning, install the new lamp with same specifications.
• Reinstall glass protection, plug the power cable of appliance into electrical socket
and complete replacement. Now you can use your oven.
Type G9 Lamp Assembly:
Type E14 Lamp Assembly:
220-240 V,
AC
15-25 W
220-240 V,
AC
15 W
FIGURE 13 FIGURE 14